Home > Products > Industrial Products > SMPS Battery Charger

SMPS Battery Charger:

BPS Make SMPS Battery Charger- BCS1210SR3 is designed for charging 12 Volt battery @ max 10 Amps. It is most suitable for electrical panels with DC source like AMF panels and for automotive battery. It is compact ( 190 mm x 65 mm x 121 mm) and panel mountable. It has detachable connector for easy wiring and replacement. input AC voltage range is 170-270 Volt and DC Output is 13.5-14.5 V for charging 12 V. battery.

SMPS Battery Charger

BPS Make SMPS Battery Charger- BCS1210SR3 is designed for charging 12 Volt battery @ max 10 Amps. It is most suitable for electrical panels with DC source like AMF panels and for automotive battery. It is compact ( 190 mm x 65 mm x 121 mm) and panel mountable. It has detachable connector for easy wiring and replacement. input AC voltage range is 170-270 Volt and DC Output is 13.5-14.5 V for charging 12 V. battery.

The charger has auto Boost/ Float selection. If connected battery draws current over 1 Amp, it start the battery with Boost mode till the battery reach 14.5 V. After reaching 14.5 V. it will be shifted to Float mode with 13.5 V thus keeping battery under Float mode.

It has protection for overload, Battery Reverse connection & Over Temperature protection.

FEATURES:-

Switching Mode Control based Design
Charges batteries with CC/ CV mode.
Over Voltage & Over Current protection.
User Friendly Operation.
Input Surge current limiting.
Low Ripple & Noise.
Over Temperature Shutdown.
LED indication for
Mains(Green),
Float(Green),
Boost (Yellow) and
Battery Rev. (Red).
Potential free contact for fault indication.
Compact, detachable connector and panel
mountable

AC Input : 170-270V AC
DC Output   
 Float Mode:13.5 V
 Boost Mode:14.5 V             
Charging current :10 Amps (max.)
Withstand Voltage : I/P-O/P-3kV
Line Regulation  : +/- 2% on full load
Load Regulation : On main of +/- 2%
Working Temperature :10~60 Deg C
Efficiency  :>85% typical @ full rated load

Related products:

Password :