Home > ProductsHealthcare Products > Nurse Call Monitoring System 640

Nurse Call Monitoring System series 640:

Nurse Call Monitoring System Series 640 register all calls received in sequence and display the same at Nurse Station.

The first call pending is displayed with Big 2″ 7 segment display. 4 other calls are displayed in the sequence of receipt. If more then 5 calls are pending, the same can be scrolled down. Any call attended is automatically erased and display is replaced with the next call pending.

Read description for more info.

Nurse Call Monitoring System Series 640 register all calls received in sequence and display the same at Nurse Station.

The first call pending is displayed with Big 2″ 7 segment display. 4 other calls are displayed in the sequence of receipt. If more then 5 calls are pending, the same can be scrolled down. Any call attended is automatically erased and display is replaced with the next call pending.

If any call is pending beyond set time, the number starts blinking. It also activates a buzzer to draw attention of the nursing staff. If call remains pending even beyond 2nd limit, rate of blinking is intensified bring notice of problem.

• Serial display of calls received
-1st call displayed with 2″ Height LED
display, Next 4 calls in sequence on side
column, Further pending calls- on
Scrolling 3 Digit 7 segment displays.

• Built in Non Attendance Timer
– Pending calls flash
– Long pending calls flash at higher rates

• Modular Bed Side console
– Easy installation in std. Modular cabinet

• Status Indicators
– Ready, Call & Wait LED indication
on board, with Call & Reset switch

• Low Voltage Operation
– The system works on 12 V. DC hence
patient is not put to danger even due to
accidental snatching of wires.

• Reset at patient bed
– re-set button installed near the patient.

• Compact and flexible
– The system requires very low space and
is flexible to accommodates up to 64 beds.

• Code Blue Facilities
– Code blue alert can be activated from bed side
if the attending nursing staff feels problem which
need additional help.
– On received of code blue signal at nurse station
from any bed, code blue indication will be
activated & bed no. will be highlighted.

Series 640 consists of the following sub-systems:

a) Bed Side Call Unit
b) Patient Remote hand set
c) Door indicator
d) Toilet Pull Cord
e) Master Controller Hub
f) Nurse Station Monitor

Bed Side Call Unit:
is consists of Call Push Buttons for Call and Re-Set & LED indications for Ready(green), Call(Red), Wait(Yellow).

Ready LED indicates that the system is ok. If there is any problem with wiring, it will not glow. LED marked Call lights up when the call is made. Once the call is registered with the controller hub, LED marked Wait glows.

Patient Remote hand set:
is provided to make call form his bed. It has Push Button to call & LED indication for Ready, Call and Wait.

Door indicator:
Door indicator is installed out side the room to indicate call pending in the room.

Toilet Pull Cord:
is to be installed side of toilet to make any emergency call. It has cord attached to push button and LED indications for Ready, Call & Wait.

Master Controller Hub:
Hub is central unit installed near Nurse Monitor Console. It is consisting of one Micro-processor central Controller card, one connector card for up to 16 beds SMPS. Wires from all beds are terminated on connector PCB.

Nurse station monitor:
is to be installed at the Nurse center. Call received from any bed will be displayed by the respective bed number by 3 digit 7 segment LED display. The first call pending is displayed with Big 2” 7 segment display. Other 4 calls are displayed in the sequence of receipt. If more then 5 calls are pending, the same can be scrolled down.
Any call attended is automatically erased and display is replaced with the next call pending.

Related products:

Password :